𝗨𝘀𝗮𝗴𝗲: To attach a vertical rod to the flange of a beam where it is required to be offset from the edge of the flange.

𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀:
✓ It may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions.
✓ Maximum beam’s flange thickness 20mm.
✓ Secured in place by a cup-pointed Set Screw tightened against the flange.
✓ Permits unlimited vertical rod adjustment.
✓ The Open design permits inspection of thread engagement.

𝗦𝗶𝘇𝗲 𝗥𝗮𝗻𝗴𝗲: From 8 to 10 mm threaded rods.

𝗖𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲:
Complies with the Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19.

𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹: Carbon steel A36

𝗙𝗶𝗻𝗶𝘀𝗵: Zinc plating or Hot-dip galvanized.